Sidewall Conveyor Belt

Sidewall Range

Our sidewalls represent the latest in design ideas and manufacturing techniques. The sidewall design ensures maximum flexing without fatigue, the profile has excellent vertical stability for load retention and return side support. The design allows for high compression to ensure smooth inner deflection around small radii. Another important design feature is that the sidewalls can be pressed form both sides when being applied to the base belt, this offers much higher bond strengths and security. The fabric insertion is of the diagonal type which gives excellent tear resistance and also allows the sidewall to flex more easily. The rubber compounds used have been tested to ensure maximum flexibility along with high abrasion resistant and high tensile strength and provide additional resistances where needed.

Product Features

Steep incline conveying from 0 to 90 degree.

No transfer points.

No spillage with steep angle conveying.

Maximum utilization of space.

Minimum maintenance, long belt Life.

Wide range of materials can be handled.

Sidewall belts require a certain tensile strength and abrasion resistance. For belt has to have enough cross rigidity and ﬂexibility longitudinally to meet up with the requirement of deﬂection part of conveyor. The special designed base belt with cross rigidity solved the problem of belt deformation. The belt standard are in accordance with international
standard.

Product Use

Corrugated sidewall belt is widely used for bulk material lifting in harbor, metallurgy, tunneling, power plant, chemical industry, cement and metro, etc. The conveying capacity can be reached to 6000 m³ / h.

Main Rubber Types

Normal Standard High Abrasion Resistant

Moderate Oil Resistant

Heat Resistant to 120℃

Heat Resistant to 150℃

High Heat Resistant to 180℃

Flame Retardant(Self-extinguishing)

Other qualities may be available to special order, please contact us.

Type	H （mm）	BW （mm）	TW （mm）	P （mm）	Weight（kg/m）	Min Pulley Din（mm）
S	40	30	20	25	0.45	125
	60	50	45	40	1.38	160
	80	50	45	40	1.70	200
	100	50	45	40	2.00	250
	120	50	45	40	2.65	315
MDSF	120	75	65	63.5	3.20	315
	160	75	65	63.5	4.20	400
	200	75	65	63.5	5.02	500
	240	75	65	63.5	7.50	630
	250	75	65	63.5	7.80	630
	280	75	65	63.5	8.70	800
	300	75	65	63.5	9.40	800
HHDF	300	100	90	83	10.10	800
	400	100	90	83	14.80	1000
	500	105	95	89	19.10	1250

Our sidewalls type 120mm and higher have special diagonal fabric reinforcement in the corrugations as standard, but smaller sidewalls can have this feature where required.

The above pulley diameter is limited to ordinary grade and standard coating rubber thickness. When the special grade of coating rubber and strength are different, a larger pulley diameter may be required. Please consult for specific specifications.

Cleat Range

The design of the cleat guarantees its best performance. C-type and TC-type cleat design can provide the maximum conveying capacity and have good self-cleaning performance. The production of the cleats adopts the molding process, and the specially developed rubber materials produce the cleats with large stiffness and strong impact resistance, and they are not easy to deform even if the cleats carry higher density materials. The unique rubber formula of the cleat is designed to be stiff, and it also enhances the impact resistance of the cleat, thereby preventing the cleat from deforming due to long-term stress.　

When the conveying angle is less than 40 degrees, the cleat is generally T type; when the conveying angle is greater than 40 degrees, the cleat is generally C type, TC type or TCS type. The fine adjustment of the cleat distance needs to consider the correspondence with the sidewall wave crest, and the side bolt fastening device matched with different types of cleats can prevent materials from leaking from the gap between the cleats and unloading to cause accumulation of dead ends.

Cleat Type	Height(mm)	Base Width(mm)	Weight(Kg/m)	Min Pulley Dia(mm)
C	55	100	1.45	125
	75	100	2.00	150
	90	110	2.81	250
	110	110	3.27	315
T	55	100	1.61	125
	75	100	2.20	150
	90	110	2.70	250
	110	110	3.23	315
	140	160	5.49	400
	180	160	6.67	500
	230	160	8.60	630
TC	55	75	1.13	125
	75	100	1.82	150
	90	110	3.22	250
	110	110	3.94	315
	140	150	5.49	400
	180	150	6.81	500
	230	160	8.68	630
	280	180	14.90	800
TCS	230	160	13.80	630
	280	160	15.30	800
	360	230	22.80	1000
	470	230	30.80	1250

Our cleats form 110mm and higher have special diagonal fabric reinforcement in the vertical and angled parts, but smaller cleats can have this feature when required.

Advantage

1.Hot vulcanization

Our sidewalls and cleats are applied to the base belt by a special hot vulcanising process. This ensures the highest adhesion levels possible which eliminates the risk of separation, and is not adversely affected by high material temperatures!

Production Process	Traditional Cold Bonding	Hot Vulcanising Assembly
Adhesion	<10N/mm	>17N/mm

2.Production Range

Base belt:300-2400mm

Sidewall height:40-500mm

Cleat height:55-470mm

Belt strength:250-6000N/mm

3.Various types of rubber compounds

We have a wide range of types of rubber compounds to meet varying requirement for handing all sorts of materials.

4.Advanced computerised belt selection technique

We can use advanced computer selection technology to select the most suitable retaining belt for customers according to actual transportation requirements. If you need assistance, please write the attachment form to contact us.

5.Humanized & Safe Packing Method

FAQ

Q1. How about your experience?
We have mainly produced rubber conveyor belts for over 20 years.

Q2. What are your main products?
Multi-ply fabric conveyor belt(EP/NN type), steel cord conveyor belt, chevron conveyor belt, sidewall belt, white conveyor belt, bucket elevator belt, filter belt, and special conveyor belts with the characteristics of heat resistant, cold resistant, oil resistant, flame retardant, abrasion resistant, etc.

Q3. What about the lead time?
1) 3--5 days for sample.
2) 20--25 days for mass production. If urgent, we have the green channel.

Q4. Can you send free samples?
Yes, we provide samples for free after inquiry.

Q5. How about the package?
Standard export packing method, your special requirement will be respected.

Q6. What are your Payment terms?
T/T or L/C.

Q7. Can you do door-to-door?
No problem.

Q8. How do you ensure your product quality?
Our quality control system had been ISO9001 certified. The first-class production equipment, testing facilities, and a complete quality assurance system guarantee high quality.

Q9. What is your major market?
Our products are heavily involved in exporting all over the world, including Europe, America, the Middle East, Southeast Asia, South Africa, Australia, etc.

Q10. What you can do to support me better?
We can provide products that meet quality standards, timely delivery, transportation packaging requirements, and customers' other special requirements.

Reviews

Name3

September 6, 2024

When I had an issue with my HiYue Ice machine, their support team was on it immediately. The international warranty and responsive service made the entire process hassle-free. It's rare to find such dedication to customer satisfaction.

Name2

Name

Write a review