EP conveyor belt

Product Classification

According to whether there is edge rubber: Molded edge belt and Cut edge belt.

According to their cover rubber types: Heat-resistant, Oil-resistant, Flame-resistant, and Anti-static, among others. The appropriate cover rubber type is selected based on the specific application requirements.

Product Structure

An EP conveyor belt usually consists of the following components:

1. Top cover layer - this is the outer layer of the belt and protects the carcass from wear and tear, abrasion, and other damage.

2. Carcass - this is the main body of the belt and provides the tensile strength required to carry material.

3. Bottom cover layer - this is the inner layer of the belt and protects the carcass from moisture, heat, and other forms of damage. It also prevents material from penetrating the carcass and causing damage.

4. Fabric plies - these are the layers of polyester and nylon fabric that make up the carcass. The number of plies used in the construction of the belt determines its tensile strength and overall durability.EP conveyor belts can also have additional components such as edge reinforcements, splice materials, and other features depending on the specific application requirements.

Product Features

Polyester (EP) conveyor belt has the advantages of high initial modulus, the good thermal stability of belt body size, fatigue and wear resistance, erosion resistance of water/steam/chemical, high strength, small elongation, impact resistance, excellent groove formation ability and long service life. The polyester conveyor belt is the developing trend of the fabric conveyor belt.

Product Use

Polyester conveyor belt (usually named as EP conveyor belt), applied for medium and long distance for heavy loading materials, its tension resistant body is canvas woven by polyester in warp and nylon in weft. Its advantage including low elongation, impact resistance, high stability and high heat resistance.

Fabric specs	Ply thickness (mm/p)	Strength series (N/mm)					Cover Thickness (mm)		Width	Length
Fabric specs	Ply thickness (mm/p)	Strength series (N/mm)					Cover Thickness (mm)		Width	Length
		2ply	3ply	4ply	5ply	6ply	Top	Bottom	mm	m
EP80	0.60	160	240	320	400	480	2.0--8	0--4.5	400-2500	≤300
EP100	0.75	200	300	400	500	600
EP150	1.00	300	450	600	750	900
EP200	1.10	400	600	800	1000	1200			500 -- 2500
EP250	1.25	500	750	1000	1250	1500
EP300	1.35	600	900	1200	1500	1800
EP350	1.45		1050	1400	1750	2100			800 -- 2500
EP400	1.55			1600	2000	2400			1000 -- 2500
EP500	1.70			2000	2500	3000			1000 -- 2500